This demo shows how 3M™ UHMW Film Tape 5423 helps reduce friction-related noise between moving surfaces. Designed for teams working with automotive assemblies, conveyor systems, guide rails, chutes, drawers, cabinets, escalators, elevators, and other sliding contact points. Request a sample: https://s.3m.com/hmg3wars 3M™ UHMW Film Tape 5423 provides a low-friction, abrasion-resistant protective surface for applications where sliding, rubbing, squeaks, rattles, and wear are a concern. Demo summary • A rotating metal disc is placed in contact with a flat metal surface, creating grinding noise as the two surfaces rub together. • The same contact point is then covered with 3M™ UHMW Film Tape 5423. • The demo compares the noise produced by direct metal-on-metal contact versus contact with the tape applied between the moving surfaces. Product highlights • Low coefficient of friction characteristics are exceeded only by PTFE. • Outstanding abrasion resistance helps the tape perform in sliding applications. • Thick-caliper UHMW polyethylene construction supports extended service life as a protective surface. • Can be used where lubrication is not possible because of contamination concerns. • Effective solution for noise and vibration problems. • Rubber adhesive provides good initial tack for immediate bonding. Observed results • In the first setup, direct contact between the rotating metal disc and flat metal surface creates noticeable grinding noise. • In the second setup, 3M™ UHMW Film Tape 5423 is applied at the contact point between the two surfaces. • With the tape applied, the rotating disc rubs against the tape surface instead of the metal surface beneath it. • The demonstrated setup produces noticeably less noise with 3M™ UHMW Film Tape 5423 applied. Why it matters • Reducing friction at contact points can help minimize noise, wear, and surface damage. • Noise reduction is relevant in automotive, transportation, elevator, escalator, furniture, and industrial assembly applications. • Low-friction surfaces can support smoother movement in conveyors, chutes, slides, blades, guide rails, and discharge areas. • Abrasion-resistant tape can help protect surfaces exposed to repeated movement or sliding contact. • Die-cutting flexibility helps teams adapt the tape to specific contact points, shapes, and wear zones. Chapters 00:00 Introduction 00:15 Noise reduction demonstration 00:34 Conclusion Resources & next steps • Request a sample: https://s.3m.com/hmg3wars • UHMW tapes overview: https://s.3m.com/5rb20ml7 • Product details, 3M™ UHMW Film Tape 5423: https://s.3m.com/fjiwzbjr • Find the right engineered industrial tape: https://s.3m.com/gz7jyeec #3MEngineeredIndustrialTapes #EngineeredForEngineers

 11      0